| Sulfur | Sulfur has insectici... |
| Caustic so | Caustic soda solutio... |
| Caustic so | Caustic soda flake i |
| Soda ash | Soda ash used in foo... |
| Aluminum o | Aluminum oxide white |
| Loctite | Loctite a revolution... |
+86-351-4080661
Loctite®Fixmaster®fast curing Epoxy Resin - Mixing Cup
Pre-measured epoxy mixed cup. In 5-15min in the adhesive. Anti-armor chemicals Property. Can be used to fill the porous surface of the wear and tear on the plug part. yes Bonding Glass, hard plastic, rubber and metal ideal
|
color |
gray |
|
Curing time |
10min |
|
Highest temperature |
80℃ |
|
Packing specification-No. |
10tube； |
Loctite®Fixmaster®Poxy Pak-fast curing Epoxy resin
The product is fast curing, high temperature degrees, thick liquid in 4-6min to reachoperating Strength. Any material can be bonded to the actual repair, fill and sealholes, cracks and damaged surface. The ABS certification.
|
color |
Colorless transparent |
|
Curing time |
4-6min |
|
Highest temperature |
150℃ |
|
Packing specification-No. |
1 oz.Syringe-81120； |
Loctite®406 Prism® Cyanoacrylate
The multipurpose instant adhesive liquid is a branch of each person in their toolbox necessary for general maintenance and repair adhesive. It can play an immediate role. Without clamping, mixed or wait. The standing of the goods, when you need to immediately bonded anything. For example, adhesive rubber, production" O" type ring. Approved by ABS.
|
color |
Colorless transparent |
|
Curing time |
20-40min |
|
Highest temperature |
82℃ |
|
Packing specification-No. |
1/3 oz. bottle； |
Loctite®480 Prism® Cyanoacrylate
The product applies to the vulnerable to vibration, vibration or part of the loop. Black, leathery quick-drying glue containing rubber composition, resistance to impact, collision and environmental influences, bonding and sealing effect is very good. Especially suitable for bonding phase metal binding.
|
color |
black |
|
Curing time |
60-120min |
|
Highest temperature |
100℃ |
|
Packing specification-No. |
20g bottle |
Loctite®454 Prism®Cyanoacrylate
The ideal adhesive for long and short of water seepage Material, Loctite ® 454 Prism ®Cyanoacrylate cream like not flowing, especially for vertical surfaces. yes an acidiccyanoacrylate adhesive. Suitable for porous and acidic surfaces. Recognized by the ABS.
|
color |
Colorless transparent |
|
Curing time |
15-90min |
|
Highest temperature |
82℃ |
|
Packing specification-No. |
20g tube |
Loctite®E-120HP Hysol® Epoxy resin cementing agent
The product has a super High strength, was amber, not collapse, aviation-grade Epoxy resin,for requirementhigh high impact peel Strength Strength and occasions. Applyadhesives, including aluminum, steel and other metal boxes of various plastic and ceramics, anddissimilar materials.
|
color |
amber |
|
Curing time |
8hours |
|
Highest temperature |
150℃ |
|
Packing specification-No. |
50mlSyringe； |
Loctite®330 Depend adhesive
The product within a few min into a high impact and high peel Strength Strength of strongacrylic adhesive. Glass can be bonded, including, including most of the material. nomixed bag, including its own catalyst and adhesive.
|
color |
amber |
|
Curing time |
1-2min |
|
Highest temperature |
121℃ |
|
Packing specification-No. |
25mlSyringe tool box； |
Loctite®401 Prism®Cyanoacrylate
Multi-purpose adhesive products for difficult to bond surfaces .
|
color |
Colorless transparent |
|
Curing time |
15 seconds |
|
Highest temperature |
82℃ |
|
Packing specification-No. |
20g bottle |
Loctite®380 adhesive
Enhanced rubber, bonding metal, rubber and plastics, good resistance to peel, impact andCutting Strength.loctite382 Loctite adhesive382, super quick-drying adhesive jumper.
Loctite®401Cyanoacrylate
Common, medium viscosity, for bonding porous, absorbent material and acid. Not sensitive to the surface
Packing specification:20g bottle ,500g bottle
Main adhesive Basic material:wood,paper,leather
color:transparent colorless
Category: ethyl group
Viscosity（mPa.s）:90/140
Curing speed（first/full curing）:10 second/24hours
Cutting Strength（Mpa）Sand polished steel:18/26
Relative density:1.1
Loctite®4014
Loctite®4014,Loctite adhesive4014 adhesive,
Cutting Strength: 10000（MPa）
valid matter≥100（％） Period of active use: 10（min）
Working temperature: 25（℃） Storage period: 24（month）
Specification:
20g.500g
Loctite®403，Loctite®adhesive403
adhesive，Low odor, low bloomingMoisture is good for non-precision parts with the adhesive, low odor, low blooming (do not need complex ventilation system)
color:transparent colorlessto light yellow
Category:Alkoxy ethyl
Typical use:Gap filling
Gap filling:0.20MM
Curing speed:50second/24hours
Low odor, low blooming, moisture is good, does not require complex ventilation system
Loctite®407Loctite®407 ,low Viscosity
Acid and absorption material
Specification:20g
Main adhesive Basic material:metal,rubber
Color:transparent colorlessto grass color
Category: ethyl group
Viscosity（mpa）:15/25
Cutting Strength（MPa）:10/20
Relative density:1.1
Loctite®408
Low smell，low Viscosity.
Use: Common, medium viscosity. For the inert surface, bonding porous, absorbent material and acid.
Color:transparentMaximum filling gap:0.05MMCategory:not sensitive in surface, ethyl group ViscosityMPAS:110Cutting Strength .
MPA:22Temperature range: -54℃ to 80℃Curing speed(first/full curing): 15second/3hours.
Density: 1.05 Model:Loctite 408 instant adhesive-liquidUse:metal,plastic ,tree,leather,ceramics,etc.
Loctite®409
filling big gap
Loctite®409 instant adhesive, Loctite®409 instant
Adhesive: High strength, high viscosity, fill a large gap, excellent peel, impact and Cutting Strength. Use in harsh environments, bonding rubber, metal and plastic.
Model: 409adhesive material:Electronic component,leather,plastic category,metal,wood material,other material,etc.
Brand: Classification of resin:Acrylate adhesiveHot melt type:other hot melt adhesiveCutting Strength: 1000（MPa）valid matter≥100（％） Period of active use: 10（min）Working temperature: 80（℃） Storage period: 24（month）
Loctite®410
Thixotropic good, fill a large gap, non-liquidity. For metal, plastic and rubber adhesive.
Loctite®410 ,High strength ，F(xiàn)ill a large gap excellent peel, impact and Cutting Strength. Use in harsh environments, bonding rubber, metal and plastic.
Loctite®410:
Packing specification:20g bottle，500g bottle
Color:black
Category: ethyl group
Viscosity(mpa.s):1,700/5,000
Curing speed（first/full curing）:90second/24hours
Cutting Strength(Mpa):22
Relative density:1.1
Loctite®411，Loctite®32316 enhance
Good anti-impact property，can filling gap.
Good anti-impact property，can filling gap.
Packing specification:20g bottle,50g bottle500g bottle
Main adhesive Basic material:metal，plastic ，rubber
color:colorless
Category: ethyl group
Viscosity（mPa.s）:4，000/8，000
Curing speed（first/full curing）:30second/24hours
Cutting Strength（MPa）:18/26
Relative density:1.05
loctite412 Loctite412 Temporary bonding
Low Viscosity, Low Strength, for temporary bonding.
Loctite®415—metal adhesive Cyanoacrylate
metal adhesive ,high viscosity，good anti-impact
Applications
filling gapmetal adhesive
Specifications
color:colorless semi transparent；Category:Methyl；Viscosity(mPa.s):1100~1600；Curing speed:24hours；Cutting Strength（Mpa）thick Sand polished steel:20/30；Ratio:1.1.
Loctite®417
Main adhesive Basic materialis metal，rubber，plastic. transparent，colorlessto lightyellow.ethyl group .Curing time is 24hours.Cutting Strength is 2.8.
Loctite®420
|
Brand: |
Loctite |
Model |
420 |
|
Classification of resin: |
Instant adhesive |
Viscosity |
1/5 |
|
adhesive material |
metalplastic rubber |
Cutting Strength |
2，900（MPa） |
|
Typical use |
Categoryplastic adhesive |
color |
clear |
|
Temperature range |
-53/82 |
Category |
ethyl group |
|
Agency certification |
Business project standard A-A-3097 |
Relative density |
1.05 |
|
Curing speed |
first curing10-20minfull curing-24hours |
Working temperature |
25 |
|
Maximum filling |
0.05 |
Storage period |
12（month） |
|
Packing specification |
20g bottle500g bottle |
valid matter≥ |
96（％） |
Loctite®42041
Heat-resistant, medium Viscosity of cyano Acrylate adhesiveCyanoacrylate. TheproductionProduct cured into tough elastomer with improved flexibility andHeat Property,resistance to humidity or wet environments. The product of high temperatureTypicalusefor the adhesive components, automotive components, electronicequipment, oil filteringDevices and disk drives.
Loctite®422
Main adhesive Basic material of plastic, rubber, metal.color as transparentcolorless.Category for the ethyl group.Loctite Cyanoacrylate technology provideshigh productivity with the dream become a reality. Lotte highProperty, and designedfor the Use of Cyanoacrylate specifically in the industry get the most widely used.LoctiteCyanoacrylate covering a variety of Viscosity, Curing speed, filling gap andbeing stuck with material compatibility of its products PRISM property superior yes than the most stringent requirement of the new product, the series includes enhance, low odor, low blooming, the surface is not sensitive to heat cycle products.
Loctite®424
Rubber adhesive. In low Viscosity, for adhesive B C three yuan rubber. Loctite®424 Loctite®424, adhesive rubber ethylene propylene three yuanrubber adhesive. in low Viscosity, for adhesive B C three yuan rubber.
Loctite®425
product a low Strength, fast curing of the hydrogen-based acrylate adhesive, for the solidmetal and plastic fasteners Suo Fixed time is less than 2min. Both in line with thefront, can also be used after the match. You can also Strength of Retaining adhesive for low-and adhesive. recommended for metal, nylon, polyester and many thermoplastic lastic piece on the use of the blue color of this product make it easy to control.Metal or plasticparts for locking, blue easy to identify the control.
Loctite®431
Advantage of special supply of the United States Loctite®431 adhesive.431 Quick Adhesive.431 Instant adhesive. Cash on delivery Loctite®431yes a single component, medium Viscosity, fastcuring of the YMCA Acrylate adhesive.The product is mainly used for difficult stickymaterial adhesive.
Feature:Curing speed less dependent on substrate surface humidity
Typical use: Most fast adhesive metal, plastic and elastic material, especially for adhesive porous or absorbentmaterial.
Specification: 20g
Loctite®443 enhance,Low odor, low blooming plastic
|
Model |
443 |
adhesive material |
plastic Category,rubber,metal,other |
|
Brand |
Loctite |
Classification of resin |
Acrylate adhesive |
|
Cutting Strength |
26（MPa） |
valid matter≥ |
100（％） |
|
Period of active use |
0.1（min） |
Working temperature |
120（℃） |
|
Storage period |
12（month） |
Standard |
see details |
|
CAS |
see details |
Typical viscosity |
1600（cps） |
|
totally Curing time |
24（h） |
|
|
Loctite®444
High viscosity, high temperature resistant, for jumper is fixed, large parts of the stress release, IC adhesive.
|
Model |
444 |
adhesive material |
Glass,Electronic component,Leather, plastic, rubber, fiber, Metal,wood material,other material,ceramics,other |
|
Brand |
Loctite |
Classification of resin |
Polyurethane |
|
Hot melt type |
Packaging hot melt adhesive |
Cutting Strength |
25（MPa） |
|
valid matter≥ |
190（％） |
Period of active use |
60（min） |
|
Working temperature |
20（℃） |
Storage period |
24（month） |
|
Standard |
Enterprise standard |
CAS |
156-66-2 |
|
Typical viscosity |
700（cps） |
totally Curing time |
24（h） |
Loctite®454，not sensitive in surface
Loctite®454 Instant adhesive:not sensitive in surface.common use，high viscosity
Packing specification:20g bottle
Main adhesive Basic material:wood,paper,leather,textilecolor:transparent colorlessto semi transparentCategory: ethyl group Viscosity（mPa.s）:18，000/40，000.Curing speed（first/full curing）:15second/24hours.Cutting Strength（Mpa）Sand polished steel:18/26.Relative density:1.1
Loctite®460 Loctite®460，low odor
Packing specification:20g bottle；Main adhesive Basic material:metal，plastic ，men-made rubber；color:transparent colorlessto light yellow；
Category:Alkoxy ethyl；Viscosity（mPa.s）:30/60；Curing speed（first/full curing）:50second/24hours
Cutting Strength（Mpa）Sand polished steel:14/22；Relative density:1.1
Loctite®495
Common use, low Viscosity. for the adhesive rubber, metal and plastic parts. can be filled with 0.10mm gap. rubber enhance, Medium Viscosity, impact resistance, vibration resistance, excellent resistance to peel and heat property
Packing specification:20g bottle ,500g bottle；Main adhesive Basic material:metal，rubber，plastic ；
color:transparent colorless；Category: ethyl group ；Viscosity（mPa.s）:20/60；Curing speed（first/full curing）:20second/24hours
Cutting Strength（Mpa）Sand polished steel:12/26；Relative density:1.05
Loctite®499 Loctite®499,Thermal cycle
Has good thixotropy, demand for a heat cycle components bonding.
|
Model |
499 |
adhesive material |
Glass,Electronic component,leather,Plastic, Rubber, Metal |
|
Brand |
Loctite |
Classification of resin |
Acrylate adhesive |
|
Hot melt type |
shoe melt adhesive |
Cutting Strength |
36（MPa） |
|
valid matter≥ |
26（％） |
Period of active use |
24（min） |
|
Working temperature |
150（℃） |
Storage period |
24（month） |
|
Standard |
14001 |
CAS |
27 |
|
Typical viscosity |
54（cps） |
totally Curing time |
24（h） |
Loctite®498 Loctite®498，medium viscosity，Thermal cycle
Low Viscosity, thermal cycle for the requirement of components adhesive.
|
Model |
498. |
adhesive material |
Glass,Electronic component,Leather, plastic, rubber, fiber, Metal,wood material |
|
Brand |
Loctite |
Classification of resin |
Acrylate adhesive |
|
Cutting Strength |
28（MPa） |
Working temperature |
25（℃） |
|
Storage period |
12（month） |
totally Curing time |
24（h） |
Loctite®324 anti-impact
Strong, flexible, high impact strength resistance. Need for bonding most materials such as glass and metal, with accelerator 7075. Is the big gap filling the ideal glue. It is a structural adhesive, can provide an epoxy resin strength, instantaneous dry glue curing speed. In a few minutes curing. The special formulation solvent resistance performance. UV curing, high viscosity, suitable for bonding glass and metal.
|
Model |
324 |
adhesive material |
Glass, electronic components, leather, plastic, rubber, fiber, stone type,Metal,Timber, other materials, cement products, ceramics, medical category, type of paper, other |
|
Brand |
Loctite |
Classification of resin |
Polyurethane |
|
Hot melt type |
other hot melt adhesive |
Cutting Strength |
4500（MPa） |
|
valid matter≥ |
64（％） |
Period of active use |
180（min） |
|
Working temperature |
18（℃） |
Storage period |
24（month） |
|
Standard |
Enterprise standard |
CAS |
156-62-7 |
Loctite®326fast curing，Loctite® adhesive326 adhesive
Adhesive for rigid materials, such as ferrite bonded to the metal plating pieces or loudspeaker motor parts, but also suitable for bonding metal and glass, with accelerator 7649. It is a high strength multifunctional adhesive, can provide a epoxy resin strength and instantaneous dry glue curing speed of structure adhesive. Good resistance to solvent. In a few minutes curing. Suitable for the requirements of rapid immobilization conditions.
|
Model |
326 |
adhesive material |
Glass, electronic components, leather, plastic, rubber, fiber, stone type,Metal, |
|
Brand |
Loctite |
Classification of resin |
Polyurethane |
|
Hot melt type |
Packaging hot melt adhesive |
Cutting Strength |
4500（MPa） |
|
valid matter≥ |
60（％） |
Period of active use |
150（min） |
|
Working temperature |
20（℃） |
Storage period |
24（month） |
|
Standard |
Enterprise standard |
CAS |
156-62-7 |
|
application |
air sealant |
|
|
Loctite®330 non-blended adhesive
A mixture of high viscosity glue, rubber reinforced flexible, general-purpose, good flexibility, peeling resistance and high impact strength. Fast curing, high strength. In use need to bend and elastic sheet metal and stone, wood and porous materials. In addition to bonding soft rubber almost all materials, including metal, wood, ferrite, ceramic and plastic. With 7388 or 73867387 accelerator
Loctite® 349 adhesive 1common use
Used for adhesive glass，and other materials. Feature: high adhesive strength（Glass/metal）Low temperature, high temperature.high wet Property Excellent; Curing speed fast.
|
Model |
Loctite349 |
adhesive material |
Glass,Electronic component,plastic Category, stone category,Metal,other material,ceramics |
|
Brand |
loctite |
Viscosity |
8000（Pa·s） |
|
Hot melt type |
other hot melt adhesive |
Standard |
SGS |
Loctite® 3491 common use
Fast curing, medium viscosity, specifically designed for bonding glass, is equallyapplicable to other kinds of material bonding. For the professional quality ofultraviolet UV glue, characteristics: high bonding strength, ( glass / metal )destruction test can reach the body fracture effect; flexibility formula, transparent, small shrinkage.Curing does not occur after the stress cracking, resistance to low temperature,high temperature and high humidity. Excellent performance; curing speed, a few seconds positioning, 3-5 minutes to reach the surface dry, non-stick hand, greatly improves the work efficiency; cured completely transparent, the product is long-term and changeless yellow, albino. Not easy to fall off. The advantages of good waterproof performance; through the automatic dispensing or syringe sizing, convenient operation. SGS certification, environmental non-toxic;
Use: sizing to clean the adhesive surface, pressure, discharge air bubbles, UV light irradiation for 2 ~ 5 minutes, placed after half an hour, adhesive performance.
Matters needing attention:
In 1, this product to the skin and respiratory irritant, should avoid the use of long time exposure and inhalation of vapors, after the use of soapy water to clean the contact position.
In 2, the product is sensitive to the light, in 6 ~ 25 C, the dark seal.
Loctite® 3491 common use
Fast curing, medium Viscosity, ideal for adhesive Glass, also applies to many other adhesive materials.
|
Model |
3491 |
Brand |
Loctite |
|
adhesive material |
other |
valid matter≥ |
20（％） |
|
Cutting Strength |
1100（MPa） |
Storage period |
12（month） |
|
Standard |
ISO10993 |
|
|
Loctite® 352 common use，Loctite®352 adhesive
High viscosity, tenacity Flexible, anti-impact and vibration, adhesive materials, extensive use ultraviolet light or activator, or both right to use using ultraviolet light, the second in a few minutes of curing.
Loctite®352 adhesive:
Packing specification:501L
Use: UV-curing
Color:transparent/ light amber/
Viscosity:14000/25000
Adhesive Basic material:Glass metal
Hardness:D60
Extension degree:340
Loctite® 3492common use，Loctite® adhesive 3492UV adhesive
Fast curing，Low viscosity, specially designed for adhesive glass, also applies to many other adhesive materials.
|
Model |
LOCTITE3492 UV adhesive |
adhesive material |
Metal |
|
Brand |
Loctite |
Viscosity |
56235623（Pa·s） |
|
Hot melt type |
Bookbinding hot melt adhesive |
Standard |
1653265 |
|
CAS |
65326532 |
|
|
Loctite®3493 for medical
Common use, medium Viscosity, suitable adhesive Glass and metal. UV curing, medium Viscosity, suitable adhesive Glass and metal.Appearance (transparent degree / color): transparent / light straw
Curing Category:UV
Main adhesive Basic material:Glass，metal
Viscositympa.s:5,500
Extended degree:260%
Shore scleroscope hardness:D75
Temperature range:-54°c~149°c
Loctite®3311 medical grade adhesive
Low Viscosity, slightly flexible, ultraviolet and visible light-curing adhesive, on the adhesive thermoplastic plastic and plasticized PVC adhesive is ideal. Medical grade certification.
Loctite 3311UV adhesive:
Packing specification:1L bottle
Main adhesive :plastic metal Glass
Curing category: UV-visible light
Color:transparent
